This Arc Flash Awareness course is designed to provide workers with an introduction and basic understanding of the provincial regulations in addition to the CSA-Z462 Standard and NFPA 70E requirements.

This course will provide workers with a thorough understanding of effective Electrical Safety Programs and how they must be implemented and maintained in the workplace.

Course Code: ARC-01

Course Cost: $199.99+HST/participant

Course Length: 4 Hours

The Asbestos Awareness course is designed to provide participants with an understanding of the dangers of asbestos, asbestos-related illnesses, safe work procedures, legal requirements and the different types of asbestos including where they are commonly found.

This course will cover the required personal protective equipment, medical surveillance and notification requirements.

Please note: Workers that will be performing Type 3 Asbestos Operations must complete the mandatory Asbestos Abatement training program. For more information regarding the mandatory Asbestos Abatement Worker Training Program approved by the Ministry of Training Colleges and Universities please contact MTCU at 1–800–387–5656.

Course Code: ASB-01

Course Length: 4 Hours

Course Cost: $199.99+HST/participant

This Confined Space training course provides participants with training on both the role of the Entrant and Attendant. This training will cover all applicable regulations concerning Confined Space Work, the required documentation, personal protective equipment, rescue planning/equipment and the hazardous atmospheres.

Participants will develop an understanding on the atmospheric testing requirements, common toxic gases they may encounter in a confined space and the importance for rescue plans/teams.

Course Code: CSEA-01

Course Length: 8:00 AM-2:00 PM (6 Hours)

Course Cost: $300.00+HST/participant

H₂S Survive ™ – Hydrogen Sulphide Certification ©

This certification training course provides all workers with extensive knowledge and training to identify potential hazards when working in and around Hydrogen Sulphide (H₂S) industries.

This course provides workers who may work or perform work in a setting where Hydrogen Sulfide H₂S can pose an immediate danger to life and health (IDLH). Any exposure to Hydrogen Sulphide can be dangerous to your health and potentially life threatening.

The Legislation requires all employers to provide adequate training to all workers that could be potentially exposed to any chemical hazards. Every employer shall take all measures reasonably necessary in the circumstances to protect workers from exposure to a hazardous biological or chemical agent because of the storage, handling, processing or use of such agent in the workplace.

• R.O. 1990, Reg. 833, s. 3 (1). Occupational Exposure Limits (OELs) are regulatory values which indicate levels of exposure that are safe (health-based) for a chemical substance in the air of a workplace.

Hydrogen Sulphide H₂S is an extremely toxic gas, produced when performing various scopes of work processes in many industries throughout the world. Some of these industries are below, but not limited to;

• Petroleum & Natural Gas Refineries
• Wastewater Treatment Plants
• Steel Making Plants – Coke Ovens
• Tanneries
• Pulp and Paper Mills

H₂S Survive ™ – Hydrogen Sulphide Certification ©

Training Objectives

Topics covered in this certification program include the how H₂S is created, its chemical and physical properties, all personal protective equipment for working around Hydrogen Sulphide H₂S, monitoring methods and precautions to take when working with H₂S, as well as a detailed outline on how to evacuate and not become a victim of exposure.

H2S Hydrogen Sulphide Hazards

• Hydrogen Sulphide H₂S Exposure Limits
• Safe Work Processes & Practices
• Air Monitor Testing
• Air Monitoring Equipment Operation
• Personal Protective Equipment
• Occupational Exposure Limits (OELS)
• Evacuation Protocols

This certification training has been designed by our Certified Health and Safety Consultant (CHSC) designated Director of Health and Safety written under the provisions and guideline of the Canadian Professional Trainers Association adult-based training platform. This program as well as all other programs written and delivered by Paramount Safety Consulting Inc. are reserved by Canadian Copyright. ©.

Course Code: H₂S-01

H₂S Survive ™ – Hydrogen Sulphide Certification ©

Course Length: 6Hours

Course Cost: $199.99+HST/participant

This hot work program is designed for workers whose job-tasks include burning, welding, or using fire/spark-producing tools. Training includes the legislative requirements, documentation (permits), compressed gases, ventilation, protective equipment, fire watch and atmospheric hazards.

Course Code: HW-01

Course Length: 4 Hours

Course Cost: $199.99+HST/participant

This course is designed to provide signalers and crane operators with instruction on the standard regulated hand signals for the hoisting and rigging of cranes. Participants will also develop an understanding on the operations and limitations of the equipment they’re directing, the crane dynamics involved in swinging, raising, lowering loads, stopping loads, and boom deflection.

Course Code: HS-01

Course Length: 4 Hours

Course Cost: $199.99+HST/participant

This course is designed in compliance with CSA Z460-13 “Control of Hazardous Energy – Lockout and Other Methods” , to provide participants with an understanding of the different forms of hazardous energy, the applicable regulations and the required steps to be taken as per the CSA standard. LOTO-01 will inform participants of the responsibilities for Lock Out and Tag Out, when it is required, workplace policies and how LOTO protects workers.

Course Code: LOTO-01

Course Length: 4 Hours

Course Cost: $199.99+HST/participant

This course is designed in compliance with the Transportation of Dangerous Goods Act and Regulations. Section 6.1 of the Transportation of Dangerous Goods Regulations states that a person who handles, offers for transport, or transports dangerous goods must be adequately trained and hold a training certificate.
This training covers the transportation of dangerous goods by air, marine, rail or road.
TDG-01 will provide participants with the thorough knowledge and understanding of the legislative requirements, required documentation, Schedules 1-3, classifications, Shipping names, UN Numbers, safety marks (labels,placards), means of containment, emergency plans and reporting requirements.
Participants will receive training on the safe handling and transport procedures, characteristics of dangerous goods, emergency response assistance plans (ERAP), fines/penalties for offences and the measures to be taken to eliminate the risk to public.

Course Code: TDG-01

Course Length: 6 Hours

Course Cost: $299.99+HST/participant

This course is designed to provide workers with the knowledge of the legislative requirements and to develop an understanding of the safe work procedures for trenching work.
Trenching Safety will inform workers about the many hazards associated with trenching such as cave in’s and how to prevent such hazards from occurring.
Upon successful completion of Trenching Safety, workers will have gained a thorough understanding of how to perform trench work safely, recognize hazards and control the hazards identified.

Course Code: TRE-01

Course Length: 4 Hours

Course Cost: $199.99+HST/participant