1-833-274-PSCI (7233)

Category Archives: Certified Superload Escort Program

Training Standards – How You Should Expect Training To Be

Workplace training standards are developed from the activities defined in occupational standards, and they include learning objectives to ensure that the necessary skills and knowledge are developed by a person to enable him or her to function at occupation with achieving a level of competency.
  The meaning of competency is simple. A person found to be competent must have knowledge, experience and training, knowledge of current and updated policies, procedures, legislation and regulations pertaining to the work they do, and be able to identify all hazards associated with the work they perform.
 Competency vs Competent can be defined as though both having similar meanings, competence and competency are used in different contexts. Competence refers to a person’s ability or skills and knowledge that he or she possesses. Competencies of a job refer to description of how things have to be done, how they need to be completed safely.
 Trainers are to develop a hazard control program which consists of all steps necessary to protect workers from exposure to a substance or system, the training and the procedures required to monitor worker exposure and their health to hazards such as chemicals, materials or substance, or other types of hazards such as noise and vibration.
 When a worker is expected to perform their duties and responsibilities in a safe and healthy manner, the employer needs to ensure proper training is being conducted. The employer is responsible to hire or contract a training facilitator that is competent, is in possession of a designation providing authorization to train, as well as being held accountable for their training program.
 Instructors that provide inadequate training which does not meet or exceed the training requirements, are known as  incompetent. Not only are instructors cheating the participants out of  knowledge and training. They are not providing the participants the ability to identify hazards.  These hazards if left unidentified through inadequate and substandard training,  could result in a critical injury, or even a life threatening event. 
 Participants and employers that are dependent on these competent instructors, must ensure that the instructor is in fact also trained to perform the scope of work being instructed. They must also have proof of competent training themselves.
 Employee training and development is a broad term covering multiple kinds of employee learning. Training is a program that helps employees learn specific knowledge or skills to improve performance in their current roles. The instructor has the most responsibility verifying that the participant is knowledgeable. 
 A professional instructor will be liable for the information and training provided throughout the term of the certification provided. The employer needs to determine if the instructor is in fact prepared to take on this liability. 
 Ensure that your workers, sub – contractors, are being trained with the most up to date program, ask the instructor to provide a detailed summary of the program, and the ask if they will be liable for the training delivered. If they answer yes to the above, you have a competent instructor. If they answer no to any of the above, then you need not bother asking them to provide the training. They are not competent and will increase your liability.  

O. Reg. 215/18: OVER-DIMENSIONAL VEHICLE ESCORTS – Paramount Safety Consulting Inc.


Consolidation Period:  From July 1, 2018 to the e-Laws currency date.

No amendments.

This is the English version of a bilingual regulation.


  1. (1) In this Regulation,

“accumulated demerit points” has the same meaning as in Ontario Regulation 339/94 (Demerit Point System) made under the Act; (“points d’inaptitude accumulés”)

“escort” means an over-dimensional vehicle escort as defined in subsection 110.5 (10) of the Act. (“accompagnateur”)

(2) A reference in this Regulation to a class of driver’s licence is a reference to the class of licence as prescribed in Ontario Regulation 340/94 (Driver’s Licences) made under the Act.

Appointing authority

  1. The Registrar of Motor Vehicles is designated as an appointing authority for the purposes of section 110.5 of the Act.

Appointment as an escort

  1. (1) An applicant shall satisfy the following eligibility requirements to be appointed as an escort:
  2. The applicant has successfully completed a course for escorts approved by the Registrar.
  3. The applicant holds a valid Class A, B, C, D, E, F or G driver’s licence, or an equivalent licence from another jurisdiction, and has held any such licence for at least four years.
  4. The applicant does not have more than six accumulated demerit points.
  5. If the applicant has previously been appointed as an escort, the applicant has, during such appointments, complied with the Act and this Regulation.

(2) An applicant who is a resident of another jurisdiction is exempt from the eligibility requirement described in paragraph 1 of subsection (1) if,

(a) the applicant is authorized by another province or territory of Canada or a state of the United States of America to perform functions comparable to those performed by an escort in Ontario;

(b) the applicant completed a training course that is comparable to a course for escorts approved by the Registrar before he or she was authorized as described in clause (a); and

(c) the jurisdiction referred to in clause (a) grants an exemption for Ontario residents who have been appointed as escorts that is similar to the exemption set out in this subsection.

(3) The Registrar may revoke or refuse to renew an appointment if the escort,

(a) fails to maintain a valid Class A, B, C, D, E, F or G driver’s licence or equivalent licence from another jurisdiction at any time during his or her appointment;

(b) has more than six accumulated demerit points; or

(c) contravenes the Act or this Regulation.

Identification as escort

  1. (1) An escort, while carrying out duties under his or her appointment, shall have in his or her possession his or her certificate of appointment and shall produce such certificate upon request.

(2) An escort, while carrying out duties under his or her appointment, shall wear a garment that covers at least his or her upper body and has the following features:

  1. The garment shall be fluorescent blaze or international orange in colour.
  2. On the front and the back, there shall be two yellow stripes that are 5 centimetres wide. The yellow area shall total at least 500 square centimetres on the front and at least 570 square centimetres on the back.
  3. On the front, the stripes shall be arranged vertically and centred and shall be approximately 225 millimetres apart, measured from the centre of each stripe. On the back, they shall be arranged in a diagonal “X” pattern.
  4. The stripes shall be retro-reflective and fluorescent.

(3) If an escort uses a hand-held sign to direct traffic, the following requirements apply to the sign:

  1. It shall be octagonal in shape, measure 450 millimetres between opposite sides and be mounted on a pole that is 1.2 metres long.
  2. It shall be high-intensity retro-reflective grade red in colour, with the word “STOP” written in legible high-intensity retro-reflective grade white letters 150 millimetres high in a central position on the sign.
  3. It shall be maintained in a clean and legible condition.

(4) An escort’s vehicle shall,

(a) display signs with the words “OVERSIZE LOAD” either on the front and the rear or on the roof facing both the front and back of the vehicle;

(b) display signs with the words “Certified Escort” on both sides and the rear;

(c) display orange coloured flags on each side;

(d) have amber lighting on its roof visible on a 360 degree basis consisting of either a rectangular bar positioned across the width of the vehicle or two warning lamps, one on each side of the roof, that qualify as Class 1 warning lights according to Standard J845, published on June 10, 2013 by SAE International, as amended from time to time; and

(e) not have any sign or other object affixed to it that would block the view of the warning lamps from any position around the vehicle.

Closure of highways

  1. (1) An escort shall not close a highway unless the permit issued under section 110 or 110.1 of the Act for the vehicle or combination of vehicles that is being escorted by the escort authorizes the escort to close highways.

(2) An escort who closes a highway under subsection (1) shall do so in accordance with the methods set out in Regulation 599 of the Revised Regulations of Ontario, 1990 (Highway Closings) made under the Act.

  1. Omitted(provides for coming into force of provisions of this Regulation).

Update on Ontario’s Certified Superload Escort Program

Certified Superload Escort Program

Update on Ontario’s Certified Superload Escort Program

The Ministry of Transportation has amended sections 110 and 110.1 of the Highway Traffic Act to allow a certified person who is not a police officer to direct traffic when escorting an over-dimensional superload. Supporting Ontario Regulation 215/18 details the requirements regarding the appointment, training, vehicle appearance, identification, signage, and communications for Certified Superload Escorts (CSE). Effective July 1, 2018 persons wishing to become certified to direct traffic for movement of superloads will be required to successfully complete an MTO-approved training course before being eligible for appointment. There are now training organizations approved to deliver the Certified Superload Escort Program. A small number of Certified Superload Escorts have completed the training but there is a need to have all potential Superload Escorts trained and certified by the end of the year. Consequently, effective January 1, 2019 the Ontario Provincial Police will cease to provide paid duty escorts to assist in the movement of Oversize/Overweight Superloads. Please contact the Business Innovation Team at BIT@ontario.ca for questions on the Certified Superload Escort Program. Carrier Safety Enforcement Branch Business Innovation Team